itec MySafe USB 3.0 / USBC 3.1 Gen. 2 External case SSD enclosure M.2 Serial ATA III 10 Gbit/s USB connectivity Aluminum

i-tec
Availability:

Only 8 left in stock


for 2x SATA M.2 drive – RAID 0/1/JBOD Support

£36.00

i-tec MySafe USB-C/USB-A 2x M.2 SATA Drive presents an external frame for installation of maximum two M.2 B-Key SATA Based SSD disks; you can connect this frame to your PC, notebook, or tablet by means of USB-C, or USB 3.0 interface (the connecting cables USB-C – USB-C as well as USB-C – USB 3.0 included). The USB connections USB offers very fast and easy data transfer – up to Gbps via USB-C, and up to 5 Gbps via USB 3.0. The USB-C interface is compatible with Thunderbolt 3. Rigid aluminium design provides an excellent heat removal as well as perfect protection for the M.2 disks.\n\nOne of the greatest advantages of this frame is the support of RAID, which will allow either to set high level of your data protection, or the very high data writing speed, eventually to create huge hard disk unit (consisting of two hard disks. The following RAID possibilities (if two hard disks are used) are available:\n\nRAID 0: very high data writing speed (the frame is able to perform interlaced writing to both hard disks)\nRAID 1: high data protection level (the frame perform mirroring (it writes the identical data to both hard disks; in case of failure of one of the hard disk, neither the data nor the access to the data will be lost)\nJBOD/Standalone: within the system, the frame is seen as two standalone ones\nJBOD/Spanning: within the system, the frame is seen as only one hard disk (with the capacity equal sum of capacities of both hard disks)\nM.2 installation is very simple, it takes you just few minutes

Design
Product type
SSD enclosure
Product colour
Aluminum
Material
Aluminum
LED indicators
HDD
Storage
Storage drive size
M.2 “
Supported storage drive interfaces
Serial ATA III
Number of storage drives supported
2
RAID levels
0,1,JBOD
Ports & interfaces
USB connectivity
Y
USB version
3.2 Gen 2 (3.1 Gen 2)
USB connector type
USB Type-C
Packaging content
Cables included
USB
Screws included
Y
Screwdriver included
Y
User guide
Y
Performance
Data transfer rate
10 Gbit/s
Plug and Play
Y
Power
Power source type
USB
Weight & dimensions
Width
125 mm
Depth
78 mm
Height
20 mm
Weight
165 g
Cable length
0.45 m
Package width
168 mm
Package depth
110 mm
Package height
50 mm
Package weight
295 g
System requirements
Mobile operating systems supported
Android
Windows operating systems supported
Y
Linux operating systems supported
Y
Mac compatibility
Y
Mac operating systems supported
Y
SKU: CAMYSAFEDUALM2 Category: Tag:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “itec MySafe USB 3.0 / USBC 3.1 Gen. 2 External case SSD enclosure M.2 Serial ATA III 10 Gbit/s USB connectivity Aluminum”

There are no reviews yet.

SHOPPING CART

close